Go BottomHey NH 20 series owners
 | Vince
Join Date: Posts: 1 
|
1999-12-05 10651
NH/Ford 20 Series owners I've just noticed something after changing the trans/hydrolic oil in my 1920... I am feeling and hearing a slight vibration coming from the clutch area. When I depress the clutch in the first or second stage it disappears. I'm not sure if this is normal. I think that it may have always done this. And it may be that I'm a little more "in tune" to the way that it's running after doing PM's. and the other thing is does anybody torque the nut on the injectors after bleeding the lines???
Reply to |
Quote Reply |
Add PhotoHey NH 20 series owners
| RickB.
Join Date: Posts: 1
|
1999-12-05 10666
Here is the proceedure for changing the fuel filter on a Ford/New Holland compact without having to bleed the high pressure side of the fuel system. 1. turn off fuel at tank or filter head depending on model. 2. open bleed screw on fuel supply line where it is connected to the injector pump. 3. change filter. 4. open bleed screw on filter head if your model DOES NOT have a little bleed line going directly to the tank from the filter head. 5. turn fuel back on. 6. close bleed screw on filter head (if used) when a clear stream of fuel runs out. 7. Close the bleed screw on the injector pump when a clear stream of fuel runs out (no air bubbles). 8. start the tractor. Note: it helps to have the tank at least 1/2 full. If followed exactly, this proceedure will work EVERY time. Good Luck. ....
Reply to |
Quote Reply |
Add PhotoHey NH 20 series owners
| markg
Join Date: Posts: 1
|
1999-12-06 10678
not to change the subject but what is the 1920 worth with loader and 4x4. 155 hrs. shuttle shift trans. i happen to see one for sale. thanks. mark ....
Reply to |
Quote Reply |
Add PhotoHey NH 20 series owners
| Vince
Join Date: Posts: 1
|
1999-12-06 10695
Well let me give you a ballpark price... I'd say from 13K to 14K would be a fair price. What are they asking???? ....
Reply to |
Quote Reply |
Add PhotoHey NH 20 series owners
| markg
Join Date: Posts: 1
|
1999-12-07 10712
it will be sold friday here in texas by auction. it has several implements with it that i was interested in so i thought i would go. i need a finish mower to go with my kubota. i dont think their is any danger of me stealing anything , my auction experience lately has been that stuff usually brings more than you can buy new for. those tractors around here in texas have been advertised at around 16500 so i think youre right on the price. im hoping to get the mower, a 6 foot, for around 500 or so with almost 0 time on it. ....
Reply to |
Quote Reply |
Add Photo
Go Top
Share This